Cartridge Dispensing

Cartridge Dispensing

N-2800 Series Cartridge Dispensers

The The N-2800 Series Dispensers were originally developed for robotic dispensing applications in the aerospace industry. They were designed to dispense pre-mixed 2 component Polysulfide

Read More »

Cartridge Dispensing

Model 300 & 400 Series

Tube Dispensers

N-2800 Series

Cartridge Dispensers

Have a low material usage, manual apply dispensing application that still requires good bead size consistency or shot size control? Can’t justify the cost of a full blown metering system for your application? Contact Jesco and ask about the Model 300 and 400 Series tube dispensers.

The Jesco Tube Dispensers are low cost, lightweight, air powered dispensers that eliminate the need to squeeze the material from the tube by hand. This facilitates the operator’s task of dispensing the material and thus helps provide more consistent results.

The Jesco Tube Dispensers are designed to readily accept and dispense directly from material manufacturers’ prepackaged 3 and 5 or 12 oz. tubes of adhesive. They also utilize the same plastic nozzle that is supplied with the tube of material. This saves time by minimizing installation / load time, eliminates the need to clean up messy operations and reduces material waste costs.

Material Flow from the Tube Dispenser is easily adjusted by varying the air pressure to the tube chamber. When air pressure is exhausted from the chamber, flow stops.

The Jesco Tube Dispensers are available in either Hand Held or Stand Mount versions. Various options are also available to customize their use in nearly any application.

The N-2800 Series Dispensers were originally developed for robotic dispensing applications in the aerospace industry. They were designed to dispense pre-mixed 2 component Polysulfide material directly from prepackaged 32 fl. Oz. plastic cartridges. Today, these dispensers can be utilized to dispense nearly any viscous 1 or 2 part pre-packaged materials.

The N-2800 Series Cartridge Dispensers include a lightweight, electric servo motor driven metering unit that can be mounted to the arm of a robot. This allows the length of hose connecting the metering unit to the applicator gun to be minimized and thus provides for a more responsive system. The powerful brushless DC servo motor system powers the metering unit and provides repeatable flow rates of material that are proportionate to a robot analog command signal.

The N-2800 Series Dispensers include a “Quick Change” cartridge retainer that provides for the rapid replacement of a cartridge when it is empty. It also allows materials to be dispensed from a standard plastic cartridge at pressures up to 2000 psi without bursting.

The N-2800 Series Cartridge Dispensers include a Nema 12 rated “stand alone” control panel that is built to JIC standards. This control panel is used to monitor and control all dispenser functions and parameters. It also includes a complete robot and operator interface to the dispenser.

Various options are available for the N-2800 Series Cartridge Dispensers. Options such as a “Time Lapse Warning” package provide visual and audible indicators of the remaining work life of the mixed material being dispensed.

Other types of cartridge dispensers are also available from Jesco. Smaller capacities, Hydraulic drive, Air powered and N-3200-CD Series FACTS type cartridge dispensers are available. Contact Jesco for further details.